Domain Details
The top panel of the Domain Details page shows the number of devices enrolled in the domain.
To add devices to the domain, click Enroll Devices.
To remove devices from the domain, click Unenroll Devices.
To rename a domain, click anywhere in the domain name, or hover over the domain name and click the pencil icon
Clock Synchronization
The Clock Synchronization field displays the current Grand Master clock device for the domain.
Note: The 'Grand Master' clock is not the same as the 'master clock' (which can be identified in Dante Controller) - it is the device that acts as clock master for a domain with multiple subnets. For domains with only one subnet, this field will read 'Not Available'.
To change clocking settings for the domain, click Clocking Settings.
Shared Audio
The Shared Audio panel lists any shared audio group configured for the domain, and allows you to edit the group.
Devices
The Devices field lists the devices in the domain, their enroll and connectivity states, and which IP subnet they are in.
Legacy Interop
Enable Legacy Interop to allow association with pre v4.0 firmware devices.
Note: Legacy Interop must also be enabled globally in the Network & Security settings.
Enroll by IP Address Status
This field displays issues that were encountered during manual device enrollment by IP address - for example, IP addresses that could not be found, and devices that were not successfully enrolled.
Copyright © 2019 Audinate Pty Ltd. All Rights Reserved.